Skip to Content

Do Snowboard Bindings Come with Screws and Hardware?

The adrenaline rush that one gets from snowboarding is the best feeling for all the adrenaline junkies out there.

If you are one who loves the adrenaline feeling resulting from snowboarding, you might also have faced troubles in past looking for the best possible equipment. Good snowboarding equipment should offer the best experience of the ride. 

In this process, what can be more challenging than finding the right bindings for your snowboard? In any snowboarding ride, you must look for such bindings that offer you the safety and security you seek without compromising the thrilling adventure. 

Do snowboard bindings come with screws and hardware?

Almost all the bindings come with screws and hardware except for one or two. Usually, four screws are a must in providing flexibility, stability, security, and safety. Good pair of bindings should allow you to handle the board with ease and feel comfortable while riding.

What comes with snowboard bindings?

To secure binding styles, flex, angle, and position, snowboarding bindings hardware really gets the job done. These also make the ride even more enjoyable for beginners, mountain riders, and freestyle riders while ensuring their safety.

The Essential Left and Right Bindings 

Good bindings should really be able to handle all the pressure that you put into them. Snowboard bindings are made with that thought in mind and so it gives you the sturdiest possible bindings. 

The most basic thing that comes with snowboard bindings is the left and right bindings. All the different varieties of snowboard bindings have them.

Packed with a Packet Full of Hardware

Snowboard bindings usually come with all the essential hardware. It includes screws, washers, and so on. These are very important as they secure the bindings into the snowboard perfectly that offers a smooth ride.

Sometimes, hardware can come loose but being alert before going on a ride and checking the screws before the adventure can solve this issue.

The Vital Mounting Disks 

At what angle should the bindings be placed is a crucial question for all snowboarders. Snowboard bindings can come with more than one disks, for example, Union bindings usually come with two disks. 

In recent years, some manufacturers are seen to be more environmentally friendly as a result, they are providing one disk with several features rather than two.

Attached Footbed, Ankle Strap, and Toe Strap

All the bindings come with ankle straps and toe straps. These are the most basic yet they are very much important for security, safety, and better grip. 

The function and features on the straps may vary in different bindings but they all offer you the necessary support and flexibility you need for snowboarding. 

Are snowboard binding screws universal?

Snowboard binding screws are universal with minor exceptions. Bindings screws are manufactured in a way that makes them compatible with any snowboard. All the snowboard bindings include the same diameter screws. 

However, some binding screws are band-specific. For example, some Burton bindings have special features that include different screws, washers, and disk lengths, and all. 

Apart from its universal appeal, some minor variations are witnessed in snowboard bindings from manufacturer to manufacturer. 

Do Burton bindings come with hardware & screws? 

Burton bindings come with necessary hardware and screws. Burton bindings come with top four screws or washers.

However, the inserts come with the Burton board. It also comes with disks that are necessary for positioning the angle. Hardware and screws also vary in the case of different versions of Burton bindings. 

Do wakeboard bindings come with hardware?

Wakeboard bindings come with metric hardware for positioning the snowboard bindings to the board. It also comes with mounting screws. Wakeboard bindings also come with disks needed for angle positioning. 

Do union bindings come with hardware? 

Union bindings usually come with hardware. It comes with several base plates (usually two) which make them very compatible with other snowboards. Additionally, Union bindings usually come with screws or washers within the hardware packet.

How do you assemble snowboard bindings?

Staying safe and secure on the slopes is essential for all the snowboarders out there. For securing that safety, you must place the snowboard bindings in the perfect position so that it gives you the grip that you need for snowboarding. 

Even if you have first-hand knowledge of assembling the pieces on a snowboard, you still may find it difficult to place the right pieces in the right order. 

If you follow the simple steps provided below thoroughly, you can have a perfectly placed snowboard with bindings in no time. 

Get Your Tools Ready:

First, you have to make sure you have all the necessary tools ready for assembling. In assembling a snowboard binding to a snowboard, you will need a good Phillips screwdriver and a wrench.

You can also get your measuring tape ready although it is optional. If you can, you can keep the instructions that came with the snowboard bindings for better assistance. 

You also need to get your favorite pair of snowboard bindings ready. You must choose a pair that is comfortable and fits your riding style and the size of your foot. 

Find Out If You are Regular or Goofy:

In this step, you need to find out which foot is your dominant foot. To determine that, you can do the slide technique in your home. It means you should just play around and try to find out while you are sliding which foot leads the way. 

If this sounds tricky, then you can have one of your friends gently push you from behind. In this process, the foot you stick out to save yourself from falling is your dominant foot. Your dominant foot be it left or right determines whether you are regular or goofy. 

Determine Your Stance Width: 

Depending on whether you are a beginner or a pro, your stance width will vary. Nevertheless, determining your stance width is an essential part of snowboard bindings. If you are starting new, it is better to look at the board’s references for knowing which one best suits you. 

A good stance width for a beginner should be comfortable and it should be a little bit wider than your shoulder. The distance from one’s kneecap to heel can be another way for finding out standard stance width.

Determine Your Angle and Positioning:

Determining your angle and position is a significant part and for the most part, it depends on your preferences and likings.

All riders should have some angles on the front and rearfoot. Typically, most people have somewhere between fifteen to twenty-one angles in the front foot. 

Additionally, in the rear foot, the angle varies quite a bit. The back binding should be at zero degrees. Typically, the rear foot will have slightly less angle than it has on the front foot. 

You can also have both of them at the same angle. In the end, it all really comes down to your preferences and to what you are comfortable with. 

Mount the Bindings: 

In this step, you should take out the hardware packet (e.g., screws, mounting disks) that comes with your snowboard bindings. After determining your stance, angle, and position, you need to apply them as well.

Accordingly, you now need to remove the footbed then place the disk in it. After that, you will align your preferred angles to the front and back bindings. 

Now is the time to fasten all the screws in the correct place and after that, you will need to adjust the high backs. 

Finally, you will have to place your preferred boots at the binding. You also have to make sure that your toe and ankle straps have been centered.

Ready to Ride:

You have to remember one thing that your positioning or settings will change as you progress as a snowboard rider. 

You just need to make sure that all the screws are tightly placed and it is catering to your safety and security.

What angle should my snowboard bindings be set at? 

Snowboarding bindings should be set very precisely unless it will not provide the adventure that you signed up for when you first thought of mastering the skills of snowboarding.

To give a quick recap, when your toes are pointed more towards the nose of the board, then it is called a positive angle. Moreover, when your toes are positioned more towards the tail of the board, then it is referred to as a negative angle.

Although angles can vary from person to person but based on differing experiences of many riders, you should ride between positive 15 to positive 24 for the front foot. In addition, you ride between positive 6 or negative 15 for the back foot.

How should snowboard bindings be set for beginners? 

For beginners, snowboard bindings should be set at a comfortable position so that they can get full exposure to the fun adventure that they are seeking for.

Stances, angles, and positioning can vary especially if you are a beginner. The best way to find out a beginners’ set-up is to play around with the snowboard and find out what position works best for you.

However, if you are a beginner, you can start with setting the front binding to positive 15 and the back binding to positive 3 or positive 0.

You should also be knowledgeable about whether you are regular or goofy. As a beginner, you can also begin with a duck stance and practice what setup suits your riding style.

The snowboard binding with screws and hardware helps to adjust to snowboard perfectly to give an excellent experience of snowboarding. So choose wisely when you pick yourself one.

Happy snowboarding!

Frequently Asked Questions:

Why are snowboards so expensive?

Why are snowboard bindings so expensive?

Are snowboard bindings universal?

Do snowboards come with bindings?

How tight should snowboard bindings be?

Do snowboards come with boots?